NU2205

100W电荷泵快充芯片首发,采用双电芯架构,势不可挡

概述

The NU2205 is a 99% efficient, 10-A battery charging solution using a switched cap architecture. This architecture and the integrated FETs are optimized to enable a 50% duty cycle, allowing the cable current to be half the current delivered to the battery, reducing the losses over the charging cable as well as limiting the temperature rise in the application. The dual-phase architecture reduces the input cap requirements as well as reducing the output voltage ripple.


放大

关键特性
  • • 98.0% Efficient at 2:1 charge mode, 99.2% Efficient at 1:1 charge mode

    • Switched Cap Architecture Optimized for 50% Duty Cycle.

        - Input Voltage is 2x Battery Voltage (6.8 V to 9.5V)

        - Output Current is 2x of Input Current (Up to 6 A)

        - Reduces Power Loss Across the Cable

    • Bypass Mode from Adapter to Battery

        - Low Ron Charging Path Resistance to Support 8A Input and Output Charging Current

    • Dual Input Power Path Management

        - Two Drivers for External Back-back MOSFETs integrated to manage power from two different input sources

    • Support Mask and Primary/Secondary Slave Operation

    • Integrated Programmable Protection Features for Safe Operation

        - Input Over-Voltage Protection (BUS_OVP)

        - Input Over-Current Protection (BUS_OCP) with Adjustable Alarm

        - BUS Reverse-Current Protection (BUS_RCP)

        - Input Over-Voltage with External OVP FET

        - Battery Over-Voltage Protection (BAT_OVP) with Adjustable Alarm

        - Output Over-Voltage (VOUT_OVP)

        - IBAT Over-Current Protection (BAT_OCP) with Adjustable Alarm

        - Battery Temperature Monitoring

        - Connector Temperature Monitoring

    • Programmable Settings for System Optimization

        - STAT, FLAG, and MASK options for Interrupts

        - ADC Readings and Configuration

    • Integrated 15-Bit Effective Analog-to-Digital Converter (ADC)

        - ±0.5% VAC1, VAC2 and BUS Voltage

        - ±5% BUS current at 3A and above

        - ±0.5% VOUT Voltage

        - ±0.125% BAT voltage with Differential Sensing

        - ±1.5% BAT Current at 8 A with External RSENSE =2mΩ

        - ±1% BAT Temperature

        - ±1% BUS Temperature

        - ±4℃ Die Temperature

应用
  • • Smart Phones
  • • Tablet PC